Applications:
1.25 Gigabit Ethernet over Cat 5 cable
Description:
DW-T1000G 1000BASE-T Copper GBIC transceivers are based on the GBIC
Multi Source Agreement
(MSA). They are compatible with the Gigabit Ethernet and 1000BASE-T
standards as specified in IEEE Std
802.32. The 1000BASE-T physical layer IC (PHY) can be accessed via
I2C, allowing access to all PHY
settings and features. The DW-T1000G uses the GBIC’s RX_LOS pin for
link indication, and 1000BASE-X
auto-negotiation should be disabled on the host system. The
DW-T1000G is compatible with 1000BASE-X
auto-negotiation, but does not have a link indication
feature(RX_LOS is internally grounded).
Ordering information
Part number Operating Case temperature
DW-T1000G 1000Mbps only, SERDES interface, Copper GBIC with spring
latch
References
1. Gigabit Interface Converter (GBIC) Transceiver Multi-Source
Agreement (MSA),
2. IEEE Std 802.3, 2002 Edition. IEEE Standards Department, 2002.
3. “AT24C01A/02/04/08/16 2-Wire Serial CMOS E2PROM”, Atmel
Corporation.
4. “Alaska Ultra 88E1111 Integrated 10/100/1000 Gigabit Ethernet
Transceiver”,Marvell Corporation.
Important Notice
Performance figures, data and any illustrative material provided in
this data sheet are typical and must be
specifically confirmed in writing by DONGWE before they become
applicable to any particular order or
contract. In accordance with the DONGWE policy of continuous
improvement specifications may change
without notice.
The publication of information in this data sheet does not imply
freedom from patent or other protective rights
of DONGWE or others. Further details are available from any DONGWE
sales representative.
contact:
Email: sales055@dongwe.cn
Skype: dongwe055
Mobile / whatsapp: +86 189 2640 2115
